Representation of a single component within an image or frame. More...

#include <codec.h>

Data Fields
unsigned char *	data
	Image data is stored as an unsigned octet type whether it's actually 8 bit or a multi-byte depth.
unsigned char	xdec
	The decimation factor in the x and y direction.
unsigned char	ydec
int	xstride
	Distance in memory between two pixels horizontally next to each other.
int	ystride
	Distance in memory between two pixels vertically next to each other.
int	bitdepth
	8 for 'normal' video precision; data is unsigned bytes centered on 128.

Detailed Description

Representation of a single component within an image or frame.

Field Documentation

◆ xdec

unsigned char daala_image_plane::xdec

The decimation factor in the x and y direction.

Pixels are reduced by a factor of 2^xdec so 0 is none, 1 is decimated by a factor of 2. ( YUV420 will have xdec of 1 and ydec also of 1. YUV444 will have xdec and ydec set to zero ).

◆ xstride

int daala_image_plane::xstride

Distance in memory between two pixels horizontally next to each other.

The value is in bytes regardless of the 'actual' underlying depth (either unsigned bytes for 8 bit video or unsigned 16 bit shorts for high-depth video). The xstride may be larger than the actual data width calculated from the bitdepth; this implies packed rather than planar data.

◆ ystride

int daala_image_plane::ystride

Distance in memory between two pixels vertically next to each other.

As with xstride, this value is always in bytes.

◆ bitdepth

int daala_image_plane::bitdepth

8 for 'normal' video precision; data is unsigned bytes centered on 128.

Greater-than-8 indicates high-depth video; data is unnormalized host-endian order unsigned signed 16-bit shorts (two octets). For example, 10 bit video would declare a bit depth of 10, use the lower 10 bits of each 16 bit short, and center on 512.

The documentation for this struct was generated from the following file:

daala/codec.h